• API© style 500 series format
• Max Gain: 71dB
• Max Output Level: +25dBu
• Pad: -33dB
• Output level: 0 to -30dB
• +48V Phantom Power
• Polarity switch
• Discrete 12dB/octave HPF (High Pass Filter) variable from 20Hz to 315Hz
  ‍
• Input transformer: Original 1:4 Studer 1.022.400.00
• Output transformer: Original 1:0.761 Studer 1.022.352.00
  ‍
• Frequency response (1kΩ load): ±1dB from 6.5Hz to 25KHz
• Mic input impedance: 1.2kΩ
• DI input impedance: > 1.0MΩ
• Output impedance: < 20Ω - Transformer balanced
• Equivalent Input Noise (EIN): -118dBu @ max gain (Mic input)
• Power consumption: 120mA | Peak 215mA

Designed and assembled in our workshop in Saint Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

This unique DI02S is one of the results of tests carried out with our new method of printing front panels using direct UV printing - a process that gives us greater creative freedom while reducing our environmental impact (less toxic waste generated, Greenguard gold-certified inks...).

We printed this faceplate on a raw steel panel, treated by cold blackening process using hematite. It gives to this DI02S a truly distinctive finish, both raw and elegant.

All technical specs remain the same as the standard DI02S :

• Class A push-pull power stage, inspired by vintage HI-FI output stages: a must for exceptional roundness and transients
• Very high input impedance - over 4 MΩ - not loading the source, and independent of the PAD position
• 0 or +13dB input gain
• OUTPUT PAD (-12/-24/-36dB) allowing to input microphone preamplifiers after the DI02S

• Max input level: +9dBU without PAD | +18dBU with PAD
• Max output level: +22dBU without PAD | +19dBU with PAD

• Output transformer: Carnhill VT24499
• Integrated buffer circuit on the LINK output
• Rear instrument input, linked to the front panel input (could be used as a second LINK OUT, but will not benefit from the BUFFER)
• VU Meter to monitor how hard you hit the output transformers (including clipping indicator)
• Earth lift on the XLR outputs to avoid ground loops (independent for each channel)

• Frequency response (1kΩ load) : ±1.0dB from 5.4Hz to 25+kHz | ±0.2dB from 20Hz to 20kHz
• SNR : >102dB (0.2% max THD)

• Worldwide compatible power supply: 100-240V | 50-60Hz
• Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
• Weight : 4.3kg | 9.4lb

• Available accessories : V-LOCK power cable

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

• Max Gain: 65dB
• Pad: -33dB
• Output level: 0 to -30dB
• +48V Phantom Power (independent for each channel)
• Polarity switch
• Discrete 12dB/octave HPF (High Pass Filter) variable from 20Hz to 315Hz

• Input transformers: Neutrik NTM-4
• Output transformers: Haufe RK443

• Mic input impedance: 1.2kΩ
• DI input impedance: > 1.0MΩ
• Output impedance: < 20Ω - Transformer balanced
• Equivalent Input Noise (EIN): -125dBu @ max gain (Mic input)

• Max input level: +9dBU without PAD | +18dBU with PAD
• Max output level: +22dBU without PAD | +19dBU with PAD

• Earth lift on the XLR outputs to avoid ground loops (independent for each channel)

• Worldwide compatible power supply: 100-240V | 50-60Hz
• Dimensions (1U rack) : 483x260x44mm | 19.0x10.2x1.7in
• Weight : 4.1kg | 9.0lb

• Available accessories : V-LOCK power cable

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.