As part of our Custom Series, the AMP4100 is made to order, although a few units are sometimes available in the workshop. This product can also be customised for your needs - feel free to contact us for more information.

• Carefully calibrated 4-channel amplifier configuration
• 4×100W @ 4Ω (THD<1%)
• 4×60W @ 8Ω (THD<1%)
• 4×60W @ 2Ω (THD<1%)

• Electronically balanced inputs with studio-grade buffer circuit
• Neutrik^© XLR input connectors
• Earth lift on the XLR inputs to avoid ground loops (for all channels)
• Simple & easy speaker outputs wiring on 8-pin Phoenix connector

• Frequency response (1kΩ load): ±1dB from 20Hz to 25KHz
• Distortion: 0.03% from 20Hz to 20kHz @ 1W

• Pop-free start & stop
• DC-Error Detection with automatic power supply shutdown
• Overheating protection

• Idle Losses @ 230V/50Hz: < 16W
• Max power consumption: 470W
• Ultra-efficient Class-D amplification: 92% efficiency at full power

• Power supply: 180-260V | 50-60Hz in standard and 90-130V operation on request

• Dimensions (1U rack): 483x270x44mm | 19.0x10.6x1.7in
• Weight : 4.1kg | 9.0lb

• Included accessory : 8-pin Phoenix connector for speaker outputs | Standard IEC power cable
• Optional accessory : V-LOCK power cable

Designed and assembled in our workshop in Saint-Vérand (France). All parts are manufactured by our beloved partners in France & Europe.

If you want to get the very best performance out of your 500 series modules, the R10 is the serious rack for the serious sound you want.

Because the R10 is built to official 500 Series specifications (surprisingly, not all racks are!) it will work flawlessly with any properly-designed 500 series module you wish to include in it.

• 10-slot chassis for 500-series modules
• XLR + TRS inputs and outputs on each channel
• Variable-position screw holes to help with module installation
• Internal VCA link jumpers (for compatible modules only)
• High quality internal switching power supply, 100-240V
• 2400mA of power
• LED current metering - perfect to monitor the total modules consumption
• 48V Phantom Power
• Overload & short-circuit protections
• 134mm height. 3U
• 6.3kg | 14lbs

Made in USA !

If you want to get the very best performance out of your 500 series modules, the R6 is the serious rack for the serious sound you want.

Because the R6 is built to official 500 Series specifications (surprisingly, not all racks are!) it will work flawlessly with any properly-designed 500 series module you wish to include in it.

• 6-slot chassis for 500-series modules
• XLR + TRS + DB25 inputs and outputs on each channel
• Variable-position screw holes to help with module installation
• Internal VCA link jumpers (for compatible modules only)
• High quality internal switching power supply (100-240V)
• 1000mA of power
• LED current metering - perfect to monitor the total modules consumption
• 48V Phantom Power
• Overload & short-circuit protections
• Solid steel chassis with bumpers to support the unit in both horizontal and vertical configurations‍
• Collapsable handle for portability
• 13” long x 7.5”wide x 5.5” high
• 3U rackmount ears available as an option.
• 4.3kg | 9.5lbs

CHANNEL 7-8 THRU I/O
‍The channel 7-8 thru connections can be used as a way to quickly and easily convert your signal from or to DB-25, XLR, and TRS connectors.

Made in USA !